andrew_bidlaw@sh.itjust.works to Asklemmy@lemmy.mlEnglish · 2 months agoDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?sh.itjust.worksimagemessage-square84fedilinkarrow-up1127arrow-down14
arrow-up1123arrow-down1imageDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?sh.itjust.worksandrew_bidlaw@sh.itjust.works to Asklemmy@lemmy.mlEnglish · 2 months agomessage-square84fedilink
minus-squareandrew_bidlaw@sh.itjust.worksOPlinkfedilinkEnglisharrow-up2·2 months agoAfter you properly connected it, sealing just one seems okay, isn’t it?
minus-squareBlueSquid0741@lemmy.sdf.orglinkfedilinkarrow-up4·2 months agoIf you tighten just one side, it can pull the connector in that direction. Think of tightening heatsink screws unevenly on each side.
minus-squareandrew_bidlaw@sh.itjust.worksOPlinkfedilinkEnglisharrow-up1·2 months agoThese seem way more forgiving tho. Up to the point you can connect it hot and working and it’d go nice.
After you properly connected it, sealing just one seems okay, isn’t it?
If you tighten just one side, it can pull the connector in that direction. Think of tightening heatsink screws unevenly on each side.
These seem way more forgiving tho. Up to the point you can connect it hot and working and it’d go nice.