I just installed a mesh WiFi network in addition to my ISP-provided router that could barely reach upstairs. I had some locally hosted services set up as per Mediabox. All containers were set up with my machine IP(?) 192.xxx.x.xx and were working great inside my network, which is all I wanted to do while I’m learning. I noticed today that if I connect via the other, mesh WiFi network that this IP can’t be accessed, despite it being the same machine. What’s going on?

All advice much appreciated as I am (obviously) a self hosting novice!

  • med@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    If you’re starting the mediabox setup on the isp network, it’s doing local natting with iptables, based on the IP that it resolves from the hostname. Probably would need to shut down and re-up to walk between the deco’s and the isp wifi domains.

    I agree with the other comments, looks like you might be in a double NAT scenario - fortunately for you, I think I know how to fix it, seeing as we’re both running deco’s!

    You want to go into the smartphone app, go to ‘More’ at the bottom right, (as opposed to ‘Network’), Advanced > Operation Mode > Access point.

    Be aware this will cause a disruption, and anything connected to them will need to be reconnected so it gets dhcp/ip addressing from the isp router rather than the deco.

    The other alternative is, if they’re already in AP mode, it might be recognizing the deco SSID as a separate network to your ISP’s router, and randomizing your mac address (for anonymity across airports and hotels and such). Then, with your original mac address holding the first IP in lease, your ‘new’ mac address gets a different one. Check your mac with ip link too when connected to the two different networks, and see if you can find an option to set it manually for both networks, or just use your default one for those networks.

    I’d love to hear how you get on, I’ve been putting off building this exact solution (mediabox) from scratch, had no idea there was a project set up to run it all

    • 1111@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Hi!

      The hostname thing is weird. I was able to navigate to the hostname in my browser which successfully showed the mediabox landing page (I believe this is ‘Homer’), but all the links on there were pointing to the machine IP. If I changed the address to be hostname:32400, maybe it would have worked, but I didn’t try that. I guess homer should route to a machine IP not a localhost so as when you land there from another device it properly routes to the machine which can serve the apps.

      Aside: Do you (or anyone reading!) know how you do that thing where you alias your machine IP to an arbitrary name? I’m sure I did it once upon a time with ‘bonjour’(?), but I don’t recall any more than that.

      Anyway, turning the deco’s onto access point mode solved everything :)

      Regarding mediabox - there seems to be a few good projects like this, they are actually incredible and super helpful for a learning perspective. I started with YAMS which actually has miles better documentation and is super helpful for setting up the services. Mediabox seems to assume you know a bit more about how the *arrs work. It sets up the containers and the folder structures really nicely, but for a novice like myself it took some time to get all the applications configured.

      It’s been a fun project though!

      • med@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        Sweet! Yeah, I’m guessing that the iptables-mangle and landing page link setup relies on getting that IP before populating the page, and that it’s not reactive to changing IP address. It might have worked if you were disconnecting networking all together, and joining a different network, but with the wonky way wifi roaming actually works, the mediabox management scripts probably never noticed there was a need to re-trigger.

        You’re looking for mdns! Depends on which distro you’re on. For apt based stuff like mint, look for mdns (used to be libnss-mdns on raspberry pis, guessing it’s the same for mint? It’ll install avahi zeroconf stuff if it’s not there already. Check the service is running, then ping $HOSTNAME.local - replace with whatever your host name is.