In some ways that is the answer. Crashes keep happening because they are not being held accountable to regulators because they are not reporting these incidents and no one is exercising oversight to be sure the reporting matches reality.

I think over the years, accurate reporting by manufacturers has been done because they generally do not want to be known as that car company that killed a child and it could have been prevented with a 50 cent bolt. As a result, regulators have been less hawkish. Of course there are probably political donations in the US to help keep the wheels turning.

I’ve come to the realization, at least where I live, that a hell of a lot of accidents are prevented because of drivers who are actually aware and safe. This goes a bit beyond defensive driving IMO. I’m talking flat out accident avoidable. There is an entire class of drivers who are not even aware of the accidents they have almost caused because someone else managed to avoid their stupid driving.

The majority of accidents that are likely to happen with these robocoffins will be single car or robocoffin meets robocoffin. The numbers on safety after a year will be acceptable because non accident causing error prone driving is not reported in any official capacity.

I still maintain that the only safe way to have autonomous vehicles on the road is if they do not share the road with human drivers and have an open standard for communicating with other autonomous cars.

Can’t wait to see how well it works to glue armored panels on.

Something that has been bothering me lately. Reasonable people who counter the toxic misinformation leaving the platform only allows the disease to grow and spread. But reality is they weren’t reaching the people that needed the dose of reality anyway. And then I realized that the algorithms have always been the disease, my feeds are my own echo chamber to drive engagement, just as theirs are. I’ve pretty much cut all social networks out. The only way to change minds is honest respectable conversation, and I am not a person to change anyone’s mind.

We’re fucked

And if the only people willing to work for the tyrant only kids the ring, it will take a long while for someone to stop his worse actions, if anyone ever does.

I don’t believe in heros, they were just brave enough or dumb enough and in the right place to do some good. And that might actually describe this guy. But still just a flawed person.

I absolutely disagree with much of what Liz Cheney supports, but I’ll still give her props for serving on the J6 committee knowing what it could mean for her career.

Been using Onn boxes for years and absolutely love them. They are about as pure android TV as you can get. I would definitely recommend the 50$ pro version over the 20$ original though.

Great tips just want to add a few. Yes use drywall mud, slop it on, not too thick. It will contract. Didn’t try to get it perfect with the spackle knife. Use coarse and fine drywall sandpaper or a sponge. The sponge will help get the corner crisp, if you use paper, wrap it around a square block. Use very light pressure. Give it a day or 2 to dry before sanding. Use a quality printer before painting.

Some people will say you should make sure all the loose bits are chipped away, in my experience you may end up taking much more down than you want. Try and get anything raised chipped away and some peel stop primer will help to hold it down and prevent future chipping.

Subscription based navigation? Want to use your car’s navigation system, there’s a fee for that? Want to fly a drone, that’ll be 9.99/month. Hopefully there will be a carve out for emergency systems.

This will also allow Tesla to up their traffic game. If everyone is using the Starlink GPS for navigation they’ll have all the data.

Yes they do and I do add my own tech but my experience with some of these devices has not been great.

I have LG TVs which I connected to the network and have been updated over the years to have really bad UX and are now polluted with ads.

I had an LG sound bar that was great for a while until it completely stopped working. Powers on, all functions seem to work, just no sound. Originally it worked as a Chromecast device too, but they stopped doing updates and Google stopped working with the old API.

My fear is that eventually there will be an update that bricks a device. Now I’ve taken them off the network, but how long before we have TVs that require Internet to even function.

These smart TVs have a lot more hardware and software than they need which means a lot more to break.

Miss the days when you could buy a dumb TV and add the tech you wanted.

I also suck at this. There is a lazy way though you’ll have to accept a certain look. My great grandmother had doilies everywhere. Every surface was covered. Most nearly completely, a few of the bigger tables just had a small one. Once a week she would collect them all and wash them. I didn’t realize till much later in life that the purpose they served was to collect dust to keep it off your surfaces.

I wonder if something more aesthetically passing to the modern eye would be as effective or if the intricate lace is important to the function.

Start looking for tripped GFCI outlets.

If there is no power to the switch and the breaker didn’t trip there is likely a switch with GFCI on the mix.

Another possibility could be a bad breaker (assuming you don’t have actual fuses), check this by flipping the breaker off and back on. This could also help to identify other lights/outlets on the circuit. If there is a wiring problem, knowing what other devices are on the circuit could help you track the problem.

While not impossible, it is unlikely that a wire has been severed. It is possible that a wire came loose at another outlet or fixture in the circuit.

If there was a true short, the breaker would be tripped out fuse blown and it would continue to trip.

Problem exists between breaker and wall switch.

I vaped for quite a while. Got a bit addicted to the tinkering and the juice hunting. It can be a fun hobby which probably makes it a bad way to quit if you’re anything like me.

I worked myself down on the nicotine levels until I was at zero.

Relapsed back to cigarettes after not having vaped for a few months due to stress.

Finally stopped cold turkey. Didn’t go back to vaping just decided it was time.

Things that ultimately helped:

• Having a reason to quit that I could remind myself of daily as an affirmation.
• My partner was also quitting, I needed her to stop and needed to be there to support her efforts.

If I was going to do it again, I’d probably look into Fum or something similar. Probably add some nicotine gum at the start to ease the chemical addiction.

My grandfather worked in a lab at a brewery. His job was to sample grain coming in. Rejected grain cars were sent to the cereal factories.

This is why I prefer “smart” controls for dumb things. If the control gets bricked I can replace it or the thing will still work without it.

100% agree.

I configure my editor to use 3 space characters per tab. I’ve worked with people who prefer tabs represented as 2 or 8 or just about any number. But I can look at the same code as them worth my preferred look.

Also works best for line length restrictions. A tab is a single character and always is.

For anyone like this to be a good thing there needs to be a system of checks and balances. There should be an appeal process that is low effort and low or zero cost. There should also be a verification process by a third party before anything can be added.

I do, but I do it on my terms when I know it is stable. I don’t allow anyone to push updates to my system.

I don’t remember much about my OS courses from 20 years back, but I do recall something about walls between user space and kernel space. The fact that an update from the Internet could enter kernel space is insane to me.