I installed Arch because I liked the idea of building everything from the ground up, choosing all of my utilities, and gentoo would take too long on my laptop. Still haven’t finished my DE 2 computers and 3 years later
I installed Arch because I liked the idea of building everything from the ground up, choosing all of my utilities, and gentoo would take too long on my laptop. Still haven’t finished my DE 2 computers and 3 years later
I’m not sure what’s going on, I can think of a couple things worth checking.
First I would make sure that all the files are being copied over properly. In a terminal window, run ‘ls -la /home’ and ‘ls -la /new_home’ or ‘ls -la /old_home’ and compare the outputs. Both should be the same and have a folder with your username. Check inside the user folder as well by appending ‘/username’ to the command (ex: ‘ls -la /home/Doctor_Rex’ but use your linux username).
The letters on the left (rwxr-xr-x or something similar) are permissions and should be the same. Continuing across the line there’s another number that isn’t important and then it should say your username twice. If it says “root” you need to update the owner of the files. this can be done by running ‘sudo chown -r username:username /home/username’ where “username” is your linux username.
Lots of configuration settings are stored in files or directories that start with a ‘.’ and are hidden by most file managers and ‘ls’ by default. If these are missing it’d cause problems.
If everything looks the same, you could try logging in from a TTY. This won’t start a GUI, but it will allow us to see if you can log in at all. You can switch to another TTY by pressing ctrl+alt+any function key (f1/f2/f3/etc). Most distros use TTY1 or TTY7 for their GUI, so try ctrl+alt+f2. If it doesn’t change to a terminal screen, try another function key. From there it should prompt you to enter a username and password. Try and log in to your account. If you can, it’s probably an issue with KDE, if you can’t there’s still something wrong with how you have the drives mounted, missing files, or incorrect file permissions.
Sorry if the formatting is a little chaotic, I added the part about checking ownership in after writing the rest
Not that I’m aware of. It may be worth opening an issue on the github asking about reduced motion accessibility settings
Docker is professional software and because of that isn’t always the most intuitive thing to use.
The first big thing to get your head around is that there is no GUI. Everything you do to manage docker is through the command line. If you really want to, there’s some third party GUI software for managing Docker, but I haven’t used it in the 2 years I’ve been using Docker.
Once you’ve installed docker, there’s a little bit of setup required to make it run smoothly. The Docker Docs page on Linux post-installation steps has detailed instructions on how to do that and how to run a test container
You’re right. The comments here have been really weird and kinda missed the whole point of OP’s post.
Going over your steps, it looks like you forgot to copy the contents of your old home directory (partition A) into the new partition on drive B before editing your fstab file. This would cause the system to boot and not find any home directory (because once you change the fstab file it only knows to look for it on drive B) and then fail to log you in.
You also shouldn’t have to remount your home directory (partition A) before copying files over because it’s already mounted when you boot your system.
Hope this helps! Let me know if you have any questions!
+1 for kitty. Embedded images for Ranger is super cool. The only downside is i’ve been getting rendering issues for a couple seconds after waking up from suspend but that’s probably a configuration issue on my end
As far as I’m aware the only real difference is what repositories are available and what the default settings/programs/etc are
I’ll definitely give them a look once I’ve finished moving! I’d given Orpheus a look a couple months ago, but was hesitant to jump through all the hoops without knowing if there was actually any content on the other end.
You won’t be able to port forward without a vpn that supports it which will severely limit download speeds. Might be worth a shot if you have a vpn though
That would be why then! Any recommendations for music trackers to look at?
I ran into issues with availability on Lidarr. Maybe I just didn’t have the right trackers but it almost never pulled complete discography.
It might be worth checking a resource monitor such as top, htop, or bashtop to see if there’s a process using way more resources than it should
The Arch Wiki has a page for the tool :)
Edit: forgot the link https://wiki.archlinux.org/title/Fprint
Kinda interesting, but I don’t think this is the right community for it
I refactored my project 3 times but still got a lot done
HWID got fixed like yesterday, did it break again?
—-I haven’t used windows in a while, but for curiosity’s sake what are the best ways for registering windows now?—-
edit: i’m bad at reading, muses the relevant line
I feel like this works. “I was the only one to escape the disaster that was remote learning”
I’ve been happy with AirVPN for the last year or so