I’m looking for one that works well on Android Automotive. So far I couldn’t get OsmAnd to show the Android Auto UI on the full OS, or integrate with the home page (split screen music / maps), and none of the others I tried in F-droid worked at all. I need something because I’m tired of using my phone, and I don’t have Google services on my tablet (flashed with a custom build of Lineage / Android Automotive OS).
It would be nice to have an open source version of the big screen systems they’re putting in the newest cars…
Imagine something as outlandish as user serviceable infotainment systems. Like they used to have in the old days. I’m hanging on by a thread to my basic 2014 car which still has a double DIN slot I can put my own system into…some day
The company that didn’t see the 3G sunset coming, I would think. I know auto moves slow, but damn…4G was out for what, 4-5 years before development likely started on the 2019 model year?
How is the 3G sunset not solvable by just swapping out a modem module for an LTE or 5G one and maybe installing some new modem firmware? A lot of cars are running a Linux kernel under the hood, so I’d think it’s pretty well swap and go
Windows 3.1 did have a BSOD. It wasn’t always fatal, you could try to hit enter to go back to Windows, but most of the time it wasn’t really recoverable, Windows often wouldn’t work right afterwards.
I ran into them all the time in 3.11 on our 486 which had some faulty RAM (the BSOD would even be scrambled). If we could get back to Windows after that, it’d just be in a zombie state where moving the mouse around would paint stuff over whatever was left on screen, and wouldn’t respond to clicks or keypresses.
Fun times.
Regrets aplenty after some of the things I’ve drank, but none of them are about Debian.
How do these things not have unbrickable A/B firmware partitions by now? Even I have that on a $2 microcontroller. Self-test doesn’t pass after an update? Instant automatic rollback to the previous working partition.
I’d love to comply, but unfortunately the last time I tried Windows 11, my Ethernet and WiFi quit working and I had to roll back ¯\_(ツ)_/¯ how do you screw up something as basic and necessary as the internet connection?
A little slower by today’s standards, but if your needs are light, it’ll do the job. Keep in mind it only has a gigglebyte of RAM, so its capacity for running things may be limited, especially as docker applications go (since they bring a copy of each dependency). You won’t be able to run something as large as GitLab or Nextcloud, but a smattering of small apps should be within its capabilities
The thing with using the “latest” tag is you might get lucky and nothing bad happens (the apps are pretty stable, fault tolerant, and/or backward compatible), but you also might get unlucky and a container update does break something (think a 1.x going to 2.x one day). Without pinning the container to a specific version, you might have an outage suddenly due to that container becoming incompatible with one of your other applications. I’ve seen this happen a number of times. One example is a frontend (UI) container that updates to no longer be compatible with older versions of the backend and crashes as a result.
If all your apps are pretty much standalone and you trust them to update properly every time a new version of the container is downloaded, then you may never run into the problems that make people say “never use latest”. But just keep an eye out for something like that to happen at some point. You’ll save yourself some time if you have records of what versions are running when everything’s working, and take regular backups of all their data.
The problem child for me right now is a game built in node.js that I’m trying to host/fix. It’s lagging at random with very little reason, crashing in new and interesting ways every day, and resisting almost all attempts at instrumentation & debugging. To the point most things in DevTools just lock it up full stop. And it’s not compatible with most APMs because most of the traffic occurs over websockets. (I had Datadog working, but all it was saying was most of the CPU time is being spent on garbage collection at the time things go wonky–couldn’t get it narrowed down, and I’ve tried many different GC settings that ultimately didn’t help)
I haven’t had any major problems with Nextcloud lately, despite the fragile way in which I’ve installed it at work (Nextcloud and MariaDB both in Kubernetes). It occasionally gets stuck in maintenance mode after an update, because I’m not giving it enough time to run the update and it restarts the container and I haven’t given enough thought to what it’d take to increase that time. That’s about it. Early on I did have a little trouble maintaining it because of some problems with the storage, or the database container deciding to start over and wipe the volume, but nothing my backups couldn’t handle.
I have a hell of a time getting the email to stay working, but that’s not necessarily a Nextcloud problem, that’s a Microsoft being weird about email problem (according to them it is time to let go of ancient apps that cannot handle oauth2–Nextcloud emailer doesn’t support this, same with several other applications we’re running, so we have to do some weird email proxy stuff)
I am not surprised to hear some of the stories in this thread, though. Nextcloud’s doing a lot of stuff. Lots of failure points.
I was going to make some smart ass comment about browser version numbers being ridiculous anymore (after Firefox 3.6 I stopped keeping track), but then I saw it
touchpad & touchscreen gestures, swipe-to-nav
Hot diggity damn. This might make me less likely to revert to Chromium every new install, if Firefox works well with touchscreen at last. I’ll have to check this out on my Pi 5 on Ubuntu.
Me still trying to figure out how to get it to auto start / auto login on boot on my fresh new Raspberry Pi 5 without locking up at a flashing cursor screen: 😩
Good luck getting all the developers to rewrite their apps. The only reason you had any apps was because it was based on Android so it was little to no effort to port. Going plain ol’ embedded Linux is basically the death knell of your developer story. Source: been there, had no third party apps, switched to Android
I’m really curious to know what it is that causes this. I can’t get mine to do it. Even with something like 3dmark, or heavy games at 120 FPS. It gets no warmer than any other iPhone I’ve had. Which is to say, it gets warm, yeah, but not to the point I can’t hold it.
It’s kind of hilarious they didn’t just build this into the options app. But WebUSB gets a bad rap for no good reason.
WebUSB’s only sin is that it’s being spearheaded by Google. It’s a useful technology that means theoretically you only need to write to one platform - the web. Let the browser deal with the different USB APIs for each OS (please god google save me from libusb). It’s safer because of the browser’s sandboxing, the permission dialog, the much greater likelihood they’re using good standard TLS instead of rolling their own encryption, the list goes on.
Personally, I’d rather visit a web page one time to set it up and then forget about it, than to have to install Yet Another Thing™ that ends up running in the background, always checking for updates, reporting analytics back to the mothership, and constantly sucking up just a little bit of my CPU time even when I don’t have any Logitech devices connected. (Sound like any other Logitech software you know of?)
I had a Pixel phone that I wanted to reflash back to the standard factory image. Did I have to download a special program, reboot the phone into bootloader mode, and perform an ancient ritual sacrifice like I do with a Samsung phone? No, I just had to visit the right web page and click “yes, allow this page to fuck up my phone”. No lingering software left over on my PC, at least once the browser cache goes away.
Same with many Arduino and ESP32 projects, by way of WebSerial. If the page you’re reading doesn’t have to send you off to some other program and can just, right there in the web page, flash your device with the software it’s telling you about, that’s a good thing.
The web is becoming the application platform of choice. No App Store guardians to reject you from it. No 30% cut to the man. The list of reasons to have to install a program to your native OS is shrinking. Even 3d games can be done entirely in the web now. Rejecting WebUSB/WebSerial just means developers have to keep writing stuff for every OS (if you’re lucky).
All good points. I fully agree, and I deserve it for living on the edge of technology like this. (The cavemen probably burned a few eyebrows off before figuring out not to touch the fire)
Worth noting, I didn’t mean to use snap, it was that “apt install chromium-browser” transparently installed it as a snap and I wasn’t paying attention at the time.
In general I don’t really care one way or another between apt, snap, or just plain downloading the source and doing a good old fashioned build from source like the old days. I just didn’t know to expect this certain installation method to lock out a certain browser feature I needed at the time. Now I know, so I won’t use snap for that (or maybe ever, I’m debating whether I just uninstall it). I wonder what fell out of my brain to make room for that, though. :D
I am pretty sure the no display sleep thing is down to whether I had a VirtualBox machine as the active window when I left it, so my “fix” is just to make sure I click some other window before I leave the desk. I have had fine experiences running VMs in Windows, nothing to report. I even do crazy stuff like pass through USB devices to the guest machine and all (that seems to work regardless of what host OS I run it on).
I do run into things on Windows and Mac sometimes, to be completely fair. Just fewer and further between. Maybe that’s just because there’s fewer things I can do on them, though. (Can’t build embedded Linux or Android images on them)
It’s worth a whole post of its own. Shame I had to drown it out with the other crap.
Give it a few more years. At this rate, by 2028, the entire back of the phone will be camera bump and you’ll be able to lay it down on a flat surface at last.