• 0 Posts
  • 36 Comments
Joined 1 year ago
cake
Cake day: June 13th, 2023

help-circle




  • Someone more knowledge than me can correct me, but I’m pretty sure you could buy a newer bigger drive to replace an older drive. You obviously wouldn’t get the full capacity as it would be limited by the other older slower drives. However, you would get a, theoretically, more reliable drive than a random one on eBay. Then as you replace older drives eventually you could have increased size.

    Caveat is that it will put stress on the old drive to rebuild, however you’d get that with any drive you put in. General wisdom I saw says to replace all the drives. Although that can be expensive.

    I’m any case make sure you have a backup before you do any of the changes.








  • Looking at the picture, a regular piece of wood should work as long as the thickness is the same. Otherwise the front will sit a bit proud if thicker, or there will be a gap if thinner. Though you could trim the dado back on the sides if it’s thicker. Edit: and make sure to measure size before trying to take it off. Just in case it breaks more.

    It looks like that particle board is nailed to the face. Hopefully it isn’t glued as well, otherwise it’ll be a beast to get off. Those screws are just for the handle and likely have no structural qualities.